Design Calculations of Steam Duct

Client:    INNOSPIN AG, Switzerland
Code/Standard:
–    ASME B31.1 – 2010 – Power Piping
–    ASME Section VIII, Division 2, Part 5 – Design by Analysis
Software used:
–    Intergraph CAESAR II
–    Autodesk Simulation Mechanical
–    FEPipe and NozzlePRO
Short Job Description:
–    Design and analysis of steam ducting for distribution of steam from turbine to air cooled condensers (diameter of ducting at the exit is 5.5 meters)
–    FE analysis with shell elements used
–    Concept analysis
–    Basic design calculations and analysis
–    Detail design calculations and analysis
–    Resulted with one patent

  • Picture46
  • Picture47
  • Picture45
  • Picture44
  • Picture48
  • exp2

Design Calculations of Steam Duct

Client:    INNOSPIN AG, Switzerland
Code/Standard:
–    ASME B31.1 – 2010 – Power Piping
–    ASME Section VIII, Division 2, Part 5 – Design by Analysis
Software used:
–    Intergraph CAESAR II
–    Autodesk Simulation Mechanical
–    FEPipe and NozzlePRO
Short Job Description:
–    Design and analysis of steam ducting for distribution of steam from turbine to air cooled condensers (diameter of ducting at the exit is 4.1 meters)
–    FE analysis with shell elements used
–    Concept analysis
–    Basic design calculations and analysis
–    Detail design calculations and analysis

  • Picture50
  • Picture51
  • Picture49
  • Picture53
  • Picture52

Design Calculations of Steam Duct

Client:    INNOSPIN AG, Switzerland
Code/Standard:
–    ASME B31.1 – 2010 – Power Piping
–    ASME Section VIII, Division 2, Part 5 – Design by Analysis
Software used:
–    Intergraph CAESAR II
–    Autodesk Simulation Mechanical
–    FEPipe and NozzlePRO
Short Job Description:
–    Design and analysis of steam ducting for distribution of steam from turbine to air cooled condensers (diameter of ducting at the exit is 4.1 meters)
–    FE analysis with shell elements used
–    Concept analysis
–    Basic design calculations and analysis
–    Detail design calculations and analysis

  • Picture57
  • Picture56
  • Picture54
  • Picture58
  • Picture55

Design Calculations of Steam Duct

Client:    INNOSPIN AG, Switzerland
Code/Standard:
–    ASME B31.1 – 2010 – Power Piping
–    ASME Section VIII, Division 2, Part 5 – Design by Analysis
Software used:
–    Intergraph CAESAR II
–    Autodesk Simulation Mechanical
–    FEPipe and NozzlePRO
Short Job Description:
–    Design and analysis of steam ducting for distribution of steam from turbine to air cooled condensers (diameter of ducting at the exit is 4.1 meters)
–    FE analysis with shell elements used
–    Concept analysis
–    Basic design calculations and analysis
–    Detail design calculations and analysis

  • Picture62
  • Picture59
  • Picture63
  • Picture61
  • Picture60